Published on March 22, 2010
The following changes have been made to the Rules sections:
MODIFIED
– Vortek heads will not be allowed.
LIMITED SPORTSMAN
- ‘Built’ engines will be allowed rod lengths between 5.7″ and 6.25″ inches in measurement.
MINI STOCKS
- Functional brakes on all four wheel will be required.
- After market body panels will be allowed but must be stock appearing.
- Weight may be added to offset competitive advantage due to lighter body panels.
- If a fiberglass roof is used, a 1/8″ metal plate is required over driver compartment. Full coverage is recommended.
EXTREMES
- Minimum tread wear reading on competition tires will be 350.
- May alter dash for comfort purposes (ie. leg room).
- Alterations in dash are allowed for cross bar of rollcage.
- Tire compound should be same as manufacturer specs (subject to track test).
- Engine compression reading must not be more than 5% of factory specs.
- Driver eligibility is restricted to entry level only. Competitors in other divisions are not allowed participation.
- Rule violations will be subject to penalties including forfeiture of winnings and/or points, suspensions, even banishment.
The blog owner requires users to be logged in to be able to vote for this post.
Alternatively, if you do not have an account yet you can create one here.
Powered by Vote It Up